^
Screw the countersunk screws
(3.9 x 22) supplied upwards through
the securing pieces on the left and
right hand sides into the work surface
to secure the dishwasher.
Ensure that the seal on the top edge
of the dishwasher fits directly
against the worktop.
If this is not the case, adjust the feet
a bit more.
Do not use silicone sealant to seal
the gaps between the machine and
any neighbouring units, as this
would hinder ventilation to the circu
-
lation pump.
Granite and marble worktops:
With these worktops the dishwasher
must be securely screwed to neighbou
-
ring units on the right and left hand si
-
des. For this you will require two special
fixing brackets (available as a special
accessory at extra cost).
Installation
65
To Next Page
Loading...
