Miele PM 1210 - Error Message Reference

Notes
24
Error messages
When a fault occurs, ironing is interrupted, the button flashes, and
a four-digit code appears in the display. Pressing the flashing but-
ton acknowledges the fault (the fault is stored in the fault memory).
The button flashes and the ironing process can be restarted.
If the fault message appears again, repeat the process or switch the
ironer off before switching it back on again. If the fault persists, call
MieleService.
Fault message Fault
F0
Heating fault
F1
F2
F8
F20
F24
F25
F39
Electronic module fault
F40
F41
F42
F43
F45
F47
F49
F50
Drive fault
F53
F57 Fan fault
F61 12 V (24V) voltage missing
F99 Machine locked
F104 Drive voltage too low
F108 General compressor fault
F120 Low voltage
F4500-4512 Control system fault
In the event of a malfunction, contact Miele Service.