Washer/ Dryer Stack
The Miele washing machine can be
installed as part of a washer-dryer
stack in combination with a Miele
tumble dryer. An appropriate stacking
kit* is required.
Installation of the stacking kit must be
performed by a Miele Service
Technician.
Reinstallation of the machine lid
When reinstalling the appliance lid,
check the firm fit of the cover at the rear
bracket for a safe transport of the dryer.
Installation on a base
The machine can be installed on an
open or closed steel base, or on a
concrete base. Concrete is
recommended.
^
Secure the two front feet of the
washer with the supplied retaining
clips when installing on a concrete
base.
^
Read the supplied Installation
manual.
Coin mechanism
The dryer can be equipped with a coin
mechanism*.
The reprogramming necessary for the
coin mechanism must be done by a
Miele Service Technician.
Empty the coin mechanism
regularly. Coins or tokens may get
jammed.
Do not install devices to auto
-
matically turn the washer off, e.g. a
clock timer. The washer must be
connected to the power supply to
open the door.
The supplied sticker must be affixed at
or near by the washer: "This washer
must be connected to the power supply
to open the drum door. Do not use
force to open the door."
* Available from your Miele dealer or
Miele.
Installation
52
To Next Page
Loading...
