Language J
The display contents can be shown
in different languages.
The displayed language can be set in
the submenu "Language" J.
^
Select the desired language and
confirm with "OK".
The flag behind the word "Language" is
a guide to find the settings menu in
case a foreign language is shown.
If the language setting was changed, it
is only valid for the current wash
program. Once the program ends, the
display will show the language which is
set under "Settings - Supervisor level".
Suds cooling
Cold water is added at the end of
the main wash to cool the wash
water.
Suds cooling is carried out when a
wash temperature of 158°F (70°C) or
more is selected.
Suds cooling should be activated when
the drain hose is hung into a sink, to
prevent scalding.
Suds cooling is factory set turned on.
Time of day
The selection allows the clock to be
shown as 24 hours, 12 hours or not
at all. The time of day is also set
here.
If the clock is not selected the timer can
only be shown as a 24 hour clock timer.
The display will show the timer counting
down until the start of the program but
not he current time of day.
Selecting the clock
^ Select the clock display and confirm.
The display changes to the time of day
setting.
Set the time of day
^ Select the current hour with the jog
shuttle and confirm. Repeat with
setting the minutes and confirm.
Press again to save the time of day.
Settings J
61
To Next Page
Loading...
