Correct installation
~
The dishwasher must be installed and connected in compliance
with the installation instructions.
~
Be careful when installing the dishwasher. Wear
protective gloves to avoid injury on any sharp metal
components.
~
The dishwasher must be correctly aligned to ensure problem-free
operation.
~
In order to ensure stability, built-under and integrated
dishwashers must only be installed under a continuous worktop
which is secured to adjacent cabinetry.
~
If you want to convert your freestanding dishwasher to a
built-under ("U") model, you will need to order the appropriate
conversion kit. If you remove the existing plinth, you must replace it
with a U-model plinth. This is necessary to avoid the risk of injury
caused by protruding metal parts.
~
The door springs on either side need to be evenly adjusted. They
are correctly adjusted if the half-opened door (approx. 45° door
opening angle) remains in this position when it is released. The door
must not fall down under its own weight.
Warning and Safety instructions
13
To Next Page
Loading...
