Language !
The display can be set to appear in one
of several different languages.
You can change the language for the
display via the
Language ! sub-menu.
^
Select the language you want and
confirm this with
OK.
The flag after the word Language
acts as a guide if a language which
you do not understand has already
been set.
If this is the case, keep selecting the
menu option which has a flag after it
until you reach the
Language !
sub-menu.
Time
You can choose whether the time is to
be displayed and between a 12-hour or
24-hour clock display. You can also set
the time of day from this menu.
If Optimise standby is switched on,
the clock will appear in Standby
mode for just a few minutes. If you
want the time of day always to be
shown, you must switch off Optimise
standby (see Settings - Optimise
standby).
To set the time of day display
^
Select the
Display option.
^
Select the display you require for the
time of day, and confirm this with
OK.
To set the clock format
^
Select the
Clock display option.
^
Select either the 12-hour or 24-hour
option and confirm with
OK.
To set the time of day
^
Select the
Set the time option.
^ Set the hours with
+/- and confirm
with
OK.
Then set the minutes.
After you have confirmed the minute
entry with
OK, the display will change
back to the
Time menu.
^ Press the U sensor to return to the
"Settings
!" menu.
Settings menu !
86
To Next Page
Loading...
