Display
The display is used to select the
following:
–
the programme
–
Extra options
–
the Delay start time
–
the Settings
! menu
– information
During a programme, the display
shows the following:
– the name of the programme
– the current time of day
– the stage the programme is at
– the estimated time left for the
programme to run
– any relevant fault messages and
notes
To save energy, the dishwasher will
switch off after a few minutes if
neither a programme is started, nor
any sensors are pressed (see
Operation - Standby).
To switch the dishwasher back on,
press the K sensor.
!
A dot in the display next to a selector
sensor indicates that a function can be
selected with that sensor. The relevant
sensor lights up.
n
The arrows on the right of the display
indicate that more options or more text
are available which can be displayed
by touching the relevant illuminated
selector sensor.
------
A dotted line will appear after the last
option available.
OK
The OK function is used to confirm a
message or setting, and also to move
to the next menu or to another menu
level.
A tick
( will appear beside the option
which is currently selected.
The "Settings ! menu" is used to alter
the dishwasher's electronics to suit
different requirements. See "Settings
menu" for more details.
Before using for the first time
20
To Next Page
Loading...
