^
Add rinse aid only until it is visible in
the opening.
The rinse aid reservoir holds approx.
110 ml.
^ Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.
^ Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.
You can adjust the rinse aid dosage
for best results (see Settings
!
menu - Rinse aid).
Rinse aid indicator
When the ( Add rinse aid message
appears, the reservoir contains
sufficient rinse aid for2-3programmes
only.
^
Add rinse aid in plenty of time.
^
Confirm with
OK.
The "Add rinse aid" message will go
out.
If you only ever use combination
products containing salt and rinse
aid in your dishwasher, you can
switch the indicators off if you wish
(see "Settings
! - Switching off the
refill indicators").
Ensure that you refill salt and rinse
aid and switch on the refill indicators
again if you are not using
combination products.
Before using for the first time
30
To Next Page
Loading...
