^
Select
Start.
Sensor wash
12:00
[
R
Start at 20:00
Cancel !
The programme name and the start time will appear in the
display.
When the set time is reached, the programme selected will
begin automatically.
,
To prevent children coming into contact with
dishwasher detergent, do not fill the detergent dispenser
until just before starting the programme, i.e. before
selecting
Start, and activate the safety lock.
To save energy, the dishwasher will switch to Standby
mode a few minutes after the last time a button has been
pressed or at the end of the programme. The display and
the indicator lights are switched off, and only the Standby
indicator continues to flash slowly.
Starting a programme before the Delay start period has elapsed:
A programme can be started before the Delay start period
has elapsed. Proceed as follows:
^
Select
Cancel and confirm with OK.
^
Select the
Main menu option.
The display will revert to the main menu.
You can now select and start a programme.
Additional options
51
To Next Page
Loading...
