Miele|home enabled appliances send information via the household wiring
network c to the master appliance d / e about the operational status of the
appliances, as well as information about the progress of the programme.
This dryer is communication enabled
and can be linked into the Miele|home
system via a communication module a
(optional accessory).
Information is displayed via:
– The SuperVision appliance d
The status of other appliances in the
system can be shown in the display
of the SuperVision appliance.
–
InfoControl XIC 2100 e
Information transmitted from the
appliances can be displayed
accoustically and optically in a
mobile master unit in the vicinity of
the house.
You can use both the SuperVision
appliance and the InfoControl unit at
the same time.
Optional accessories required
– Communication module
This must be fitted by a Miele service
technician.
– Mobile InfoControl unit
Both of these are supplied with their
own installation and operating
instructions.
The home of the future
The Miele|home system is capable of
expansion. In the future,
communication enabled appliances will
be able to be operated via a PC or a
mobile phone.
Miele{home
19
To Next Page
Loading...
Need help?
General