Before using the dryer for the first time ensure that it is
correctly installed and connected. See "Installation".
,
If the tumble dryer has not been transported as
described in "Installation" then it must be left to stand for at
least 1 hour before
it is connected to the electricity supply.
Otherwise the heat pump may become damaged.
Preparing the dryer for use is done in five steps. The dryer
guides you automatically through steps 1. to 5.
1. Welcome screen
^
Switch the dryer on with the K button.
The welcome screen will appear in the display for 3 seconds.
The display for setting the language will then appear.
2. Set the language
\
\
\
Sprache
10:21
[
[
[
$ deutsch (
# english
p
! español
OK !
^
Select the language you want.
^
The sensors on the right can be used to scroll up or down
the list.
^
Confirm the language you have selected with
OK.
Before using for the first time
20
To Next Page
Loading...
Need help?
General