EasyManuals Logo

Miele T 8164 WP User Manual

Miele T 8164 WP
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Warning and Safety instructions
9
Please observe all instructions given in "Installation and
connection" and in "Technical data".
The accessibility of the plug must be always ensured, in order to
separate the tumble dryer from the mains.
Do not block the gap between the bottom of the tumble dryer and
the floor with plinth facings, deep pile carpet etc. This would hinder
a sufficient flow of air to the dryer.
Make sure the dryer door can be opened without hindrance after
installation.
Correct use
The maximum load for this tumble dryer is 7.0 kg (dry weight).
The maximum recommended loads for individual programmes are
given in the Programme chart.
To prevent the risk of fire, do not connect the tumble dryer via a
controllable socket (e.g. a timer or a peak-load switch-off device).
If the drying programme is interrupted before the end of the cooling
down phase, laundry could self-ignite.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele T 8164 WP and is the answer not in the manual?

Miele T 8164 WP Specifications

General IconGeneral
TypeHeat Pump Dryer
Capacity7 kg
Energy Efficiency ClassA++
Appliance PlacementFreestanding
Loading TypeFront Loading
Anti-Crease FunctionYes
ColorWhite
Drying ProgramsCottons, Delicates, Woollens

Related product manuals