Programme* Status** Setting
P0Demonstration mode and
factory default settings
S 0 Demonstration mode on
(the front left d and front right E
cooking zone displays come on
after switching the cooktop on).
S1 Demonstration mode off
S 9 Factory default settings reinstated
P2Power setting range S0 9 power settings
(1, 2, 3 ... to 9)
S 1 17 power settings
(1, 1., 2, 2., 3 ... to 9)
If the Auto heat-up setting is
selected, an A will flash
alternately with the continued
cooking setting in the display.
P4Keypad tone when a
sensor is touched
S 0 Off
S 1 Quiet
S2 Medium
S 3 Loud
P7System lock S0 Activating the system lock
manually only
S 1 Activating the system lock
automatically and manually
P6.Sensor switch reaction
speed
S 0 Slow
S1 Normal
S 2 Rapid
* Programmes/Status not shown here have no allocation.
** The factory default settings are shown in bold.
Additional functions
35
To Next Page
Loading...
