Miele TX2070 - Page 37

Problem Possible cause Remedy
After switching the
cooktop on, d appears in
the front left and E
appears in the front right
cooking zone display.
The cooking zones won't
heat up.
The appliance is in
demo-mode.
You need to deactivate
the demo-mode (see
"Programming").
The appliance switches
off during operation.
A cooking zone might
have been operated for
too long.
This doesn't indicate a
fault.
You can continue
operation (see "Safety
switch-off").
The cooking zone
heating switches on and
off.
Power setting 1 to 8:
This is not a fault.
This doesn't indicate a
fault.
The "timing" of the
element is normal. It is
caused by the electronic
temperature control (see
"How the cooking zones
work").
Power setting 9:
fault
The overheating
protection mechanism
has switched.
Once the ceramic surface
has cooled down to a
safe level, the heating will
automatically switch back
on again.
Problem solving guide
37