Miele TXD 160 WP - Page 73

Installation
*INSTALLATION*
73
Changing over the door hinge and
the caps
Start by removing the door hinge.
Next, swap the caps for the door
latches markedRandL. The tumble
dryer is delivered with the cap
markedR at the top.
Position of the door hinge and the caps with
right-hand door hinging (as delivered).
 Set the door down on the blanket.
Removing the door hinge
 Use the Torx screwdriver to unscrew
the fourscrews from the door hinge.
 Lift the door hinge up and off the
door.
 Reinstall the door hinge on the left-
hand side of the door.
 Leave the twoscrews for the door
hinge in place on the right-hand side
of the door.
 Leave the other twoscrews for the
door hinge in place on the left-hand
side of the door.