Miele W 149 - Programme interruption and alteration

Programme . . .
. . . interruption
^
Press the "I-ON/0-OFF" button.
^
To continue with the same
programme press the "I-ON/0-OFF"
button again.
. . . alteration
The machine will accept the following
changes after the "START" button has
been pressed:
–
Selection of a different temperature,
and/or selection or de-selection of
the "Water plus" option can be car-
ried out up to 6 minutes after
programme start.
– The spin speed for final spin can be
changed within the limits for the
programme.
After start it is no longer possible
to select a different programme.
If a different programme is selected or if
another temperature is selected 6 min
-
utes after start, the "Finish" indicator
light flashes. This does not affect
programme sequence. The indicator
light goes out when the programme se
-
lector is set back to the programme or
temperature previously chosen.
To select a different programme pro
-
ceed as follows:
^
Switch off the machine using the
"I-ON/0-OFF" button.
^
Turn the programme selector to "Fin
-
ish".
^
Switch on the machine using the
"I-ON/0-OFF" button.
^
Select a new programme.
^
Press the "START" button.
. . . skipping a programme stage
^ Turn the programme selector to
"Finish".
As soon as the programme sequence
light starts flashing for the stage at
which the programme should continue:
^ Turn the programme selector to the
appropriate programme within 4 sec-
onds.
Programmes cannot be interrupted
or altered if the programme lock has
been activated.
How to wash correctly
20