Miele W 1913 - The following fault message appears in the display and the programme has been cancelled.

The following fault message appears in the display and the
programme has been cancelled.
Fault message Possible cause Remedy A
;
Drain
fault
–
The water outlet is
blocked or restricted.
–
The drain hose has
been fixed too high.
–
Clean the fluff filter and
drain pump.
–
The maximum drain height
is1m.
;
Water inlet
fault
The water inlet is blocked
or restricted.
Check whether
–
the tap has been opened
properly.
–
the inlet hose is kinked.
– the water pressure is too
low.
;
Waterproof
fault
The water protection
system has reacted.
– Close the tap.
– Call Miele.
;
Technical
fault
There is a fault. Start the programme again.
If the fault message appears
again, contact Miele.
A To switch off the fault message: Switch the machine off with the _ button.
Problem solving guide
39