EasyManua.ls Logo

Miele W 1913 - The following fault message appears in the display at the end of a programme

Miele W 1913
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The following fault message appears in the display at the end
of a programme
Fault message Possible cause Remedy
Heating fault
The washing machine
was unable to heat up.
Start the programme again.
If the fault message appears
again, contact Miele.
Chk detergent
Excessive foam has built
up during washing.
Use less detergent next time
and follow the manufacturer's
instructions on dosage given on
the packaging.
Hygiene info
A programme of at least
60°C has not been run for
a long period of time.
Run the Cottons 75°C
programme with a universal
detergent to prevent the
formation of organic deposits
and unpleasant odours in the
machine.
Problem solving guide
40

Table of Contents

Other manuals for Miele W 1913

Related product manuals