Miele W 1913 - Standby display; Memory; Anti-crease

Standby display
To save energy, the display goes out
after 10 minutes and the indicator
light for the Start/Stop button will start
flashing slowly.
There are two options:
On
Standby is activated:
–
if a programme is not selected within
10 minutes of the machine being
switched on.
– after a programme has started.
– at the end of a programme.
Not in current prog.
(the machine is delivered with this
option selected)
Standby is activated:
– if a programme is not selected within
10 minutes of the machine being
switched on.
–
at the end of a programme.
Pressing one of the buttons switches
the display back on again.
Memory
If an Extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
When this programme is chosen again,
these settings will appear in the
display.
The machine is delivered with the
memory function deactivated.
Anti-crease
Anti-crease helps prevent creasing if
laundry is not normally removed im-
mediately after the end of a
programme.
The drum will turn at intervals for up to
30 minutes after the programme has
finished.
The door can be opened and laundry
removed at any time during the anti-
crease phase.
On
Anti-crease is activated.
Off
(the machine is delivered with this
option selected)
Anti-crease is deactivated.
Programmable functions
65