Programming and storing in
memory
The programmable functions are acti-
vated using the additional option but-
tons and the programme selector in
special combinations, which intro-
duce extra features not marked up
on the control panel.
Programming is carried out in four
steps:
1. Select programming mode
2. Select programmable function
3. Activate or deactivate programmable
function
4. Store the programmable function in
memory
1. Selecting programming mode
1 The machine must be switched off
and the drum door closed. The pro-
gramme selector must point to "Fin-
ish".
2 Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
3 . . . switch the machine on with the
“I-ON/0-OFF”-button.
4 Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
2. Selecting a programmable function
5 For the programmable function re-
quired turn the programme selector
to the setting given:
– for
A High Water level
to – MIXED WASH Poly/Cottons –
– for
B Water plus system
to – Separate rinse –
– for
C activate i compartment
to – Spin –
– for
D Soaking time
to - WOOLLENS Cold.
– for
E Gentle action
to – WOOLLENS 40°C –
– for
F Activate top-up rinse for
COTTONS wash
to – DELICATES cold –
– for
GMemory-Function
to – DELICATES 30°C –
Programmable functions
32
To Next Page
Loading...
