USER’S MANUAL MIG
____________________________________________________________________
____________________________________________________________________________________
MATT di LIEVORE SRL Via Bianche 7 36010 Carre’ ( VI ) Tel. 0445 / 892223 Fax 0445 / 390346
Any malfunction should be corrected immediately by a qualified specialist.
Keep children at a safe distance from the field of action of the automation.
9. THE CONTROLS
With the automation the gate has a power driven opening and closing. The controls
can come in various forms (i.e. manual, remote controlled, limited access by
magnetic badge, etc.) depending on needs and installation characteristics. For
details on the various command systems, consult the specific instruction booklets.
Anyone using the automation must be instructed in its operation and controls.
10. MAINTENANCE
When carrying out maintenance operation on the controller, disconnect it from the
mains power supply. The actuator does not require periodical maintenance
operations.
• Check the safety devices of the gate and automation.
• Periodically check the pushing force and correct the value of the electric torque in
the control board if necessary.
• In case of unsolved operation failures, disconnect the unit from the mains power
supply and ask for the intervention of qualified personnel (installer).
When the unit is out of order, activate the manual release to perform manual
opening and closing maneuvers.
11. NOISE
The aerial noise produced by the gear motor under normal operating conditions is
constant and does not exceed 70dB (A).
12. TROUBLES AND SOLUTIONS
Incorrect operation of gear-motor
To Next Page
Loading...