To Next PageTo Next Page
Need help?Do you have a question about the MIG 400 and is the answer not in the manual?
General| Max Gate Weight | 400 kg |
|---|---|
| Operating Speed | 12 m/min |
| Operating Temperature | -20°C to +55°C |
| Remote Control Range | 30 m |
| Protection Class | IP44 |
Keep children, people and things outside the automation working area, particularly during its operation.
Follow intended use, seek qualified assistance for malfunctions, and ensure proper installation.
Fit thermal switches, differential switches, ensure correct earthing, and comply with installation directives.
Fit necessary safety devices, keep optical components clean, and use only original parts.
Verify gate structure sturdiness, actuator push alignment, manual movement, and end-stop plates.
Verify component anchoring and the proper functioning of all safety systems like photocells.
It is essential that all safeties are checked frequently for safe remote control operation.
Check safety devices and periodically verify/correct electric torque in the control board.
For unsolved failures, disconnect the unit and seek intervention from qualified personnel.
Incorrect operation of the gear-motor.
Troubleshooting for motor vibration without rotation, including connection and capacitor checks.
Identifying and resolving failures in control and safety devices by sequential disconnection.
