Migatronic PILOT 2000 User Manual

PILOT 2000
Brugsanvisning
Instruction manual
Betriebsanleitung
Manuel d'instruction
Bruksanvisning
Version C 50113112
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: PILOT 2000
as of: week 16, 1997
conforms to directives 73/23/EEC and 89/336/EEC.
European Standards: EN60974-1
EN50199
Issued in Fjerritslev on 14th April 1997.
Peter Roed
Managing director
0105

Migatronic PILOT 2000 Specifications

General

Brand	Migatronic
Model	PILOT 2000
Category	Welding System
Language	English

Summary

EC Declaration of Conformity

Safety Warnings

General Safety Precautions

Covers electrical, radiation, fume, fire, and noise hazards.

Electromagnetic Emissions and Disturbances

General Description

Initial Operation

Setup and Connection

Covers mains connection, cable/torch connection, and configuration.

Machine Usage Guidelines

How to use the machine, including heating, cooling, and protection.

Maintenance and Error Handling

Maintenance Procedures

Describes routine maintenance tasks to ensure reliability.

Troubleshooting Common Errors

Identifies and explains common errors like no power, mains, or overheat issues.

Initial Instructions and Controls

Control Panel Overview

Explains the digital display and indicator LEDs.

Operation Modes and Switches

Covers 2T/4T function switch, AC/DC switch, and welding current adjustment.

Welding Process Modes

Details the operation of Two-stroke (2T) and Four-stroke (4T) welding.

Advanced Welding Functions

Current Adjustment Features

Covers Balance, Initial/Final Currents, Slope-up/down, and Current Control Modes.

Gas and Fixed Functions

Details Gas Post-flow, AC Frequency, Antifreeze, Hot Start, Arc Power, Pre-flow.

Technical Data