What to do if Migatronic RALLY MIG 161i shows a temperature error?
If your Migatronic Welding System displays a temperature error, allow the machine to cool down and then check if it is functional.
What does it mean if my Migatronic Welding System displays error E20-05, E20-06, or E21-03?
If your Migatronic Welding System shows error codes E20-05, E20-06, or E21-03, it means the software on the SD card is intended for a different type of control unit. To fix this, use an SD card containing software specifically designed for your control unit.
Why is my Migatronic Welding System showing error E20-01 or E21-01?
Error codes E20-01 or E21-01 on your Migatronic Welding System indicate that the SD card is not formatted correctly. You must format the SD card as FAT on a PC and then download the software to the SD card. If problems continue, consider replacing the SD card.
What should I do if my Migatronic RALLY MIG 161i Welding System displays error E21-04?
If your Migatronic Welding System shows error E21-04, it means the welding program package on the SD card is not compatible with your control unit. You should use an SD card that contains software that is the correct match for your control unit.
What to do if Migatronic RALLY MIG 161i shows error E20-03 or E21-02?
If your Migatronic Welding System is displaying error E20-03 or E21-02, it indicates that the SD card contains multiple files with the same name. To resolve this, delete the files from the SD card and then reload the software.
Why does my Migatronic RALLY MIG 161i show errors E20-01, E21-01?
If your Migatronic Welding System displays error codes E20-01 or E21-01, it indicates that the SD card is not properly formatted. To fix this, format the SD card as FAT on a PC and then download the software onto it. If the problem continues, try replacing the SD card.
How to fix Migatronic RALLY MIG 161i errors E20-00, E20-02, E21-00, E21-06, E21-08?
If your Migatronic Welding System displays error codes E20-00, E20-02, E21-00, E21-06, or E21-08, it indicates that the control unit lacks software. To resolve this, download the software to an SD card, then insert the card into the control unit and power on the machine. If the issue persists, consider replacing the SD card.
What to do if my Migatronic RALLY MIG 161i shows errors E20-05, E20-06, E21-03?
If your Migatronic Welding System shows error codes E20-05, E20-06, or E21-03, it means the software on the SD card is designed for a different type of control unit. The solution is to use an SD card containing software specifically matched to your control unit.
What to do if Migatronic RALLY MIG 161i Welding System shows error codes E20-01 E21-01?
If your Migatronic Welding System displays error codes E20-01 or E21-01, it indicates that the SD card is not formatted correctly. You need to format the SD card as FAT on a PC and then download the software onto it. If the problem continues, consider replacing the SD card.
What to do if Migatronic RALLY MIG 161i shows error codes E20-05 E20-06 E21-03?
If your Migatronic Welding System shows error codes E20-05, E20-06, or E21-03, this indicates that the software on the SD card is intended for a different type of control unit. To fix this, ensure you are using an SD card that contains software specifically designed for your control unit.
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 20-160 A |
| Duty Cycle 60% at 160 A | Yes |
| Weight | 13 kg |
| Wire Diameter | 0.6-1.0 mm |
| Fuse | 16 A |
| Duty cycle 60% at 40°C | 160 A |
| Duty cycle max. at 40°C | 160 A |
| Enclosure Class | IP23 |
| Rated Input Current | 16 A |
| Wire Feed Speed | 2-15 m/min |
| Type | MIG/MAG welding machine |
| Standards | EN/IEC 60974-1, EN/IEC 60974-10 |
To Next Page
