To Next PageTo Next Page
Need help?Do you have a question about the Mighty Mule MM600 ET-PRO and is the answer not in the manual?
Verifying gate readiness and safety before installation.
Discusses additional safety devices for entrapment prevention.
Details on the drive mechanism, motor, and power requirements.
Step-by-step guide for attaching the opener to a pull-to-open gate.
Step-by-step guide for attaching the opener to a push-to-open gate.
Steps for connecting the battery and transformer for power.
Detailed steps for connecting the transformer wires to the control board.
Steps for wiring solar panels to the power input terminals.
Explanation of DIP switch settings for soft start, buzzer, and gate type.
Completing the process of setting a personal transmitter code.
Procedure for setting the closed position limit for pull-to-open gates.
Procedure for setting the open position limit for push-to-open gates.
How to adjust the sensitivity to obstructions.
Instructions for programming a unique code for the transmitter.
Diagnosing issues based on beep patterns from the opener.
Diagnosing issues based on status light indicators on the control board.
General| Gate Type | Swing |
|---|---|
| Battery Backup | Yes |
| Motor Type | DC Motor |
| Maximum Gate Weight | 600 lbs |
| Maximum Gate Length | 16 ft |
| Power Source | AC Transformer |
| Operating Voltage | 12V |
| Battery | 12V, 7Ah |
| Safety Features | Obstruction detection |
| Warranty | 18 months |
| Control Options | Remote control, keypad |
