Mighty Mule MM360 - User Manual

Printed in China for GTO Access Systems, LLC.
Copyright
©
2016 GTO Access Systems, LLC
Document Number: R36008 REV A (12.15.16)
GTO Sales: 800-543-4283 • Fax 850-575-8912
GTO Technical Service 800-543-1236
For 24 hour/day, 7 day/week Technical Service visit http://support.gtoinc.com
For more information on Mighty Mule’s full line of Automatic Gate Operators and Access Controls visit
www.mightymule.com
MM360
ACCESS SYSTEMS, LLC
Mighty Mule® is the retail brand of GTO Access Systems, LLC
3121 Hartseld Road • Tallahassee, FL 32303
This product meets the requirements of UL325 6th Edition, 2016, the standard for gate
operator safety.
Installation Manual
Gate Swings Evenly and Freely
Hung Firmly and Plumb
Receiver
Post Bracket Assembly
12 Volt automotive or marine
type battery in weather proof
housing (Required, not included).
Gate Bracket
Single Gate Opener
Fence Post Set in Concrete
Run 1000' (max.) of low
voltage wire to control
box from transformer
(wire not included).
10’ Battery Harness
Closed Position Stop Plate
120 Volt indoor
Transformer
(surge protector
not supplied)
PVC conduit (not included)
to protect wire from lawn
mowers and weed eaters.
Warning Sign
Example of nished installation
(installations vary slightly on different types of gates)

Summary

Please Read This First!

Important Safety Information

Installer and End User Safety

Before Installation Safety

Pre-installation checks and safety considerations for gate systems.

Entrapment and Obstruction Protection

Technical Specifications

Parts List - Opener and Mounting Hardware

Installation Overview for Pull-To-Open Gates

Installation of Mounting Hardware

The Post Bracket Assembly

Install Post Bracket Assembly and Gate Bracket

Mounting the Opener

Installation of the Closed Position Stop

Procedure for installing the stop plate to secure the gate in the closed position.

Connecting the Battery

Detailed Wire Routing Diagrams

Wire Routing

Connecting the Transformer

Connecting the Solar Panel(s)

Control Board Settings

DIP Switches Configuration

Setting DIP switches for push/pull-to-open and lock/beacon modes.

Setting the Closed Position Limit

Setting Dual Sense Detection and Auto Close Timer

Set Auto-Close Time

Configuring the delay before the gate automatically closes.

Personalize Your Transmitter Setting

Connecting Accessories

Input Connections

Explanation of the control board's input terminals and their functions.

Wiring Accessories

Mighty Mule Gate Opening Sensor

Final Steps

Concluding installation tasks: cover replacement, arm remounting, signs, bolts, warranty.

Push-To-Open Installation Instructions

Set Control Board for Push-To-Open

Setting Open Position Limit (Push-To-Open)

Programming the gate's fully open position for push-to-open installations.

Maintenance

Troubleshooting Guide

Troubleshooting Feedback

Interpreting LED and audible signals to identify and resolve gate opener problems.

Warranty Repairs

Gate Operator Installation Checklist

Mighty Mule MM360 Specifications

General

Power Supply	12V DC
Type	Swing Gate Opener
Power Source	Electric
Warranty	18 months
Opening Speed	12 seconds
Weather Resistance	Yes
Maximum Gate Length	16 ft
Motor Type	DC Motor
Battery Backup	Yes
Max Gate Length	16 ft
Remote Controls Included	Yes
Operating Voltage	12V
Gate Length	16 ft (Maximum)