EasyManua.ls Logo

Mighty Mule MM571W - User Manual

Mighty Mule MM571W
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Copyright
©
2019 Nortek Security and Control, LLC. 10022116 A
Mighty Mule
®
is the retail brand of Nortek Security and Control, LLC.
This product meets the requirements of UL325, the standard for gate operator safety.
Installation Manual
(For a single or dual gate installation)
Horizontal Support
Gate Swings Evenly and Freely
Hung Firmly and Plumb
Post Bracket
Control Box
Fence Post Set in Concrete Fence Post Set in Concrete
Run 1000' (max.) of low voltage
wire to control box from
transformer (wire not included).
Power Cable
PVC conduit (not included)
to protect wire from lawn
mowers and weed eaters.
PVC conduit (not included)
to run second opener power
cable under driveway.
Gate Bracket
Warning Sign
Secondary Opener
Primary Gate Opener
Horizontal Support
Post Bracket
Gate Bracket
Warning Sign
120 Volt indoor
Transformer
(surge protector
not supplied)
Example of Dual Gate nished installation
(Installations vary slightly on different types of gates)
MM571W
MM572W
Single gate installation [MM571W]
Dual gate installation MM572W]

Table of Contents

Questions and Answers

Summary

Product Usage

Vehicular Gate Operator Class Categories

Classifies gate operators based on application and location type.

Important Safety Information

Manually Opening and Closing Gate

Instructions for safely disconnecting the operator for manual gate operation.

Before Installation Safety Guidelines

Precautions and checks to perform before installing the gate operator.

During Installation Safety Precautions

Safety measures to follow while installing the gate operator and its components.

After Installation Safety Procedures

Post-installation safety checks and responsibilities for users and installers.

Entrapment and Obstruction Protection

Details on Dual Sense Technology and how to add sensors for safety.

Warning Signs and Pedestrian Gate Installation

Requirements for installing warning signs and providing separate pedestrian access.

Required Safety Precautions for Gates

Essential safety labels and precautions for automatic gate operation.

Technical Specifications

Mighty Mule 571 W;572 W Gate Opener Specs

Detailed technical specifications for the gate opener unit.

Gate Operational Capacity

Chart detailing maximum gate weight and length supported by the operator.

Before You Begin

Powering Options Overview

Information on choosing between transformer or solar power for the gate operator.

Solar Panel and Gate Activity Chart

Guide to solar panel selection based on gate activity and geographical zone.

Check Existing Gate Size and Material

Proper Gate Installation Checks

Essential checks for gate size, material, and swing freedom before installation.

Gate Grounding Procedure

Instructions for correctly grounding the gate operator system.

Items Included for Primary Gate Opener Installation (MM571 W)

Items Included for Secondary Gate Opener Installation (MM572 W)

Tools Needed

Items Not Included in Kit

List of additional items and materials required for installation.

Check Direction of Gate Swing

Guidance on determining the correct gate swing direction for installation.

Mechanical Installation

Assessing the Gate for Installation

How to evaluate gate suitability and prepare for operator mounting.

Reinforcing Gates for Gate Brackets

Methods to reinforce gate brackets for thin-walled or panel gates.

Pull-To-Open Operator Mounting Steps

Step-by-step instructions for mounting the operator in a pull-to-open configuration.

Installing the Secondary Operator (MM572 W)

Instructions for installing the second operator on dual gate systems.

Installing Closed Position Stop Plate (Pull-To-Open)

How to install the stop plate for the pull-to-open gate configuration.

Push-To-Open Operator Mounting Steps

Step-by-step instructions for mounting the operator in a push-to-open configuration.

Installing Closed Position Stop Plate (Push-To-Open)

How to install the stop plate for the push-to-open gate configuration.

Control Box Installation

Control Box & Battery Box Mounting

Steps for selecting a mounting location and installing the battery box.

Connecting the Battery Harness

Instructions for connecting the battery harness to the battery.

Final Control Box Assembly

Procedures for wiring cables and closing the control box casing.

Connecting the Operator(s) and Battery

Preparing Cable Entry to Control Box

How to feed operator wiring harnesses through the control box cable gland.

Wiring Operator & Battery Connections

Connecting the primary operator wires and battery power to the control board.

Transformer or Solar Panel Wiring Installation

Locating Outlet and Trenching for Wire

Identifying power source, path, and trenching for low voltage transformer wire.

Connecting Power Wires to Control Box

Routing and connecting transformer or solar panel wires to the control box.

Final Transformer Connection

Connecting the transformer to the electrical outlet and ensuring proper wire stripping.

Electrical Installation and Setup

Dip Switch Settings Configuration

Configuration of dip switches for gate operation modes like push/pull and stagger.

Powering the System On

Instructions for turning on the gate operator system and initial power-up.

Transmitter Programming

Learning a Transmitter Code

Procedure for programming a transmitter to the gate operator control board.

Erasing Transmitter or Keypad Codes

Steps to erase learned transmitter or keypad codes from the control board.

Operator Limit Setting

Setting Operator Extended and Gate Limits

How to set the extended, closed, and open limits for gate operation.

Dual Sense Stall Force Adjustment

Adjusting the stall force for obstruction detection and reversing mechanisms.

Auto Close Setting

Setting the Auto Close Timer

How to configure the automatic gate closing timer duration.

Optional Smart Control Setup

Connecting Additional Devices

Wiring Accessories to Control Board

Routing accessory wires (photo beams, keypads) through the control box knockout.

Control Board Connections

Control Board Accessory Terminals

Detailed description of accessory input and output terminal functions on the control board.

Connecting Accessories

Accessory Wiring Examples

Diagrams illustrating typical connections for accessories like locks, keypads, and sensors.

Maintenance

Routine Maintenance Tasks

Recommended monthly and annual maintenance procedures for the gate operator.

Troubleshooting Guide - Audible Feedback

Troubleshooting Guide - Visual Feedback

For Your Records

Repair Service

Repair Service Procedures

Steps for contacting support, obtaining an RA number, and returning the unit for repair.

Accessories

Available Gate Opener Accessories

List and brief description of optional accessories available for Mighty Mule systems.

Appendix A

Accessory Installation Instructions

Installation guides for specific accessories like FM130/FM130-SW and FM136.

Gate Operator Installation Checklist

Mighty Mule MM571W Specifications

General IconGeneral
Gate TypeSingle Swing Gate
Gate Weight Capacity850 lbs
Control MethodRemote Control
Battery BackupYes
Operating Voltage12V DC
Solar CompatibleYes
Weather ResistanceYes
Power SourceSolar
Battery12V
Safety FeaturesObstruction Detection
Gate Length CapacityUp to 18 ft
ConnectivityBluetooth (for App control)
Warranty1 Year Limited

Related product manuals