Mighty Mule MM362 - User Manual

Printed in China for GTO Access Systems, LLC.
Copyright
©
2016 GTO Access Systems, LLC
Document Number: R36208 REV A (12.15.16)
MM362
ACCESS SYSTEMS, LLC
Mighty Mule® is the retail brand of GTO Access Systems, LLC
3121 Hartseld Road • Tallahassee, FL 32303
This product meets the requirements of UL325 6th Edition, 2016, the standard for gate
operator safety.
Installation Manual
Example of nished installation
(installations vary slightly on different types of gates)
120 Volt indoor
Transformer
(surge protector
not supplied)
Horizontal Support
Gate Swings Evenly and Freely
Hung Firmly and Plumb
Post Bracket
Control Box
Fence Post Set in Concrete
Run 1000' (max.) of low
voltage wire to control
box from transformer
(wire not included).
Power Cable
Gate Bracket
Warning Sign
First Gate Opener
Post Bracket
Second Gate Opener
Gate Bracket
Horizontal Support
PVC conduit (not included)
to run second opener power
cable under driveway.
12 Volt automotive or marine
type battery in weather proof
housing (not included).

Summary

Safety and Product Introduction

Please Read This First!

Initial safety advice and product overview before installation.

Important Safety Information

General safety precautions, hazards, and manual operation.

Entrapment and Obstruction Protection

Details on Dual Sense Technology and additional safety devices.

Specifications and Preparation

Technical Specifications

Detailed parameters for the gate opener system.

Before You Begin

Initial decisions on power and preparation.

Prepare the Gates

Checks and requirements for the gate's condition before installation.

Tools and Materials Needed

List of required tools and supplementary materials for installation.

Installation Procedures

Installation Overview for Pull-To-Open Gates

General guide to the installation process for pull-to-open gates.

Install Gate Opener Components

Steps for installing the primary gate opener and bracket assembly.

Mount Control Box and Connect Power

Mounting the control box and connecting power cables and battery.

Push-To-Open Installation

Specific steps for gates that open outwards from the property.

Configuration, Operation, and Support

Set Position Limits and Auto-Close

Adjusting gate limits and auto-close timer for optimal operation.

Personalize Transmitter Setting

Programming unique codes for remote transmitters.

Troubleshooting Guide

Diagnosing and resolving common operational issues with the gate opener.

Maintenance and Accessories

Routine care, upkeep, and optional accessories for the system.

Gate Operator Installation Checklist

Final verification of installation completeness and correctness.

Mighty Mule MM362 Specifications

General

Type	Automatic Gate Opener
Voltage	12V
Max Gate Length	16 ft
Gate Length	16 ft
Cycle Time	20 seconds
Remote Control	Yes
Safety Features	obstruction sensing