To Next PageTo Next PageWhat to do if my Mighty Mule MM272 Gate Opener beeps once when opening?
If your Mighty Mule Gate Opener beeps once when you try to run the gate, it could mean there's a blown fuse in the battery harness cable. You should check the fuse to resolve this.
Why is my Mighty Mule MM272 Gate Opener beeping rapidly?
If your Mighty Mule Gate Opener is beeping rapidly, it means the circuit board is powered up and ready. You should check the gate to ensure it's adequately maintained, free swinging, level, and plumb.
Why is my Mighty Mule MM272 showing a low battery?
If your Mighty Mule Gate Opener indicates a low battery, it might be because the battery is low or damaged. In this case, you should check the fuses.
What does 2 beeps every 2 seconds mean on a Mighty Mule Gate Opener?
If your Mighty Mule Gate Opener is beeping twice every two seconds, the circuit board might be sensing an obstruction. Disconnect any obstruction detection devices to resolve this.
What does 1 beep every 2 seconds mean on a Mighty Mule MM272 Gate Opener?
If your Mighty Mule Gate Opener beeps once every two seconds, you should check the battery connections.
What does 1 beep every 20 seconds mean on a Mighty Mule MM272?
If your Mighty Mule Gate Opener beeps once every 20 seconds, you should check the stall force adjustment.
What to do if Mighty Mule MM272 Gate Opener beeps upon power up?
If your Mighty Mule Gate Opener emits one or more short beeps upon power up, check for normal operation.
Defines classes for gate operators based on application type and safety requirements.
Important introductory notes, warnings, and advice before beginning installation.
Procedure for manually operating the gate when the opener is disconnected.
Critical safety instructions for all users and installers of the gate operator.
Safety measures to follow during the gate operator installation process.
Safety guidelines to follow after installation and basic maintenance advice.
Details on the gate operator's safety features for preventing entrapment.
Requirements for installing warning signs and managing pedestrian access.
Chart illustrating solar panel output expectations based on geographic zone and gate cycles.
Guidance on properly grounding the gate system for electrical protection.
List of necessary items not provided with the gate operator kit.
Methods to reinforce gates for secure attachment of gate brackets.
Instructions for connecting the AC transformer to the control board.
Adjusting the gate's closed position limit for proper operation.
Configuring the automatic gate closing delay feature.
General| Weather Resistance | Yes |
|---|---|
| Operating Voltage | 12V DC |
| Solar Panel Included | Optional |
| Power Source | Battery/Solar |
| Weight Capacity | 300 lbs |
| Gate Length | 12 ft |
| Battery Type | 12V |
| Remote Controls Included | Yes |
