17
Press MENU button to call out the main menu.
Highlight “Channel” using navigation buttons and press OK to enter it.
Then highlight “Dish Setup” and press OK to enter it.
Press LEFT/RIGHT navigation button to highlight Left, Middle or Right
column.
Press EXIT button to return.
A. When the “Satellite” column is highlighted:
(1)P ress button to enter Add menu.YELLOW
Satellite Name
Press RIGHT navigation button to enter rename page.
Use navigation buttons to complete a new name.
Longitude Direction
Press LEFT/RIGHT navigation button to select desired option.
Longitude Angle
Press LEFT/RIGHT navigation button to move the cursor and
press number buttons on remote control to input desired value.
Band
Press LEFT/RIGHT navigation button to select desired option.
(2)P ress button on remote control to enter Edit menu.GREEN
T he operations of Edit menu are the same as Add menu.
(3)P ress button on remote control to enter Scan menu. BLUE
Press UP/DOWN navigation button to highlighted desired item.
Press RIGHT navigation button to select desired Scan Mode,
Channel Type and Service Type.
(4)P ress button to delete. RED
Press button to switch satellite and Transponder. EPG
B. When the “Transponder” (Middle) column is highlighted:
(1) Press button on remote control to enter Add menu.YELLOW
Frequency
Press LEFT/RIGHT navigation button to move the cursor and press
number buttons on remote control to input desired value.
Symbol (ks/s)
Press LEFT/RIGHT navigation button to move the cursor and press
number buttons on remote control to input desired value.
Polarity
Press LEFT/RIGHT navigation button to select desired option
(2) Press button on remote control to enter Edit menuGREEN
The operations of Edit menu are the same with Add menu.
(3) Press button on remote control to enter Scan menu.BLUE
Press UP/DOWN navigation button to highlighted desired item.
Press LEFT/RIGHT navigation button to select desired Scan Mode,
Channel Type and Service Type..
To Next Page
Loading...