MikroTik hAP ac3 - User Manual

To Next Page

hAP ac3

hAP ac³

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

Read the installation instructions before connecting the system to the power source.

Do not power on without antennas connected!

Quickstart

Please follow these quick steps to set up your device:

Connect provided antennas to the device;

Make sure you ISP will allow hardware change and will issue an IP Address;

Connect the device to the power source;

Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network and connect to it;

The configuration has to be done through the wireless network using a web browser or mobile app. Alternatively, you can use a WinBox

configuration tool ;https://mt.lv/winbox

Once connected to the wireless network, open in your web browser to start configuration, user name: a and there is no https://192.168.88.1

dmin

password by default;

When using a mobile application choose Quick setup and it will guide you through all necessary configuration in six easy steps;

Click the "Check for updates" button on the right side and update your RouterOS software to the latest version, must have an active Internet

connection;

To personalize your wireless network, SSID can be changed in the fields "Network Name";

Choose your country on the left side of the screen in the field "Country", to apply country regulation settings;

Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols;

Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next

time;

Click on the "Apply Configuration" to save changes.

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

Main Page

Need help?

Do you have a question about the MikroTik hAP ac3 and is the answer not in the manual?

MikroTik hAP ac3 Specifications

General

CPU	IPQ-4019
CPU core count	4
CPU nominal frequency	716 MHz
RAM	256 MB
Storage	128 MB
Storage type	NAND
Wireless 2.4 GHz Max data rate	300 Mbps
Wireless 5 GHz Max data rate	867 Mbps
Wireless Standards	802.11a/b/g/n/ac
PoE in	802.3af/at
Operating System	RouterOS
License level	4
Operating temperature	-40°C to 70°C
Ethernet Ports	5
Antenna gain dBi for 2.4 GHz	2.5 dBi
Antenna gain dBi for 5 GHz	5.5 dBi
USB Port	1
Power Input	12-28 V
PoE out	Passive PoE