RouterOS includes many configuration options in addition to what is described in this document. We
suggest starting here to get yourself accustomed to the possibilities:https://mt.lv/help. In case IP
connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC
address of the device from the LAN side (all access is blocked from the Internet port by default).
Accessories
Package includes the following accessories and parts that come with the device:
ADAPT1_ EU/US Switching Power Supply 24V, 0.8A;
CLAMP1,2_ Hose Clamp SUS304 (philips type; 9mm; clamping diameter range 25-70mm) with EPE bag;
POE1_ Gigabit POE injector;
K-SET_K_Set for LHGGR&R11e-LTE6;
CASE1_ LHG-LTE-RHLEG-R0;
CASE2_ LHG-LTE-LHLEG-R0;
CASE10_ LHG-5G-390mm Dish 3,0x2.5x0,5mm;
Assembled LHGGR main leg.
Expansion slots and ports
One Gigabit Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either
straight or crossover cable can be used for connecting to other network devices. The Ethernet port
accepts 9-30 V DC powering from a passive PoE injector.
MiniPCIe slot with LTE6 modem.
SIM slot (can't be used separately).
Reset button
The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS
configuration (total 5 seconds);
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will
now look for a CAPsMAN server (total 10 seconds);
To Next Page
Loading...
