Need help?Do you have a question about the Milesight UG56 and is the answer not in the manual?
General| Model | UG56 |
|---|---|
| Category | Gateway |
| LoRa Channels | 8 |
| Wi-Fi | 802.11 b/g/n |
| Ethernet | 10/100 Mbps |
| Power Input | 12V DC |
| Operating Temperature | -40°C to +70°C |
| Connectivity | Ethernet, Wi-Fi, Cellular |
| LoRa Frequency | EU868, US915, AS923, AU915, IN865, KR920, RU864 |
| Cellular Technology | 4G LTE |
| USB Port | 1 x USB 2.0 |
Identifies key hardware parts like the antenna connector, SIM slot, and reset button.
Specifies the precise physical dimensions of the UG56 LoRaWAN Gateway in millimeters.
Explains the meaning of different LED status lights for system, LoRa, and Ethernet ports.
Details how to use the reset button for functions like rebooting or factory resetting the gateway.
Instructions for inserting the SIM card and Micro SD card into their respective slots.
Steps for correctly attaching and positioning the LoRaWAN antenna for optimal performance.
Explains the different methods to power the UG56 gateway, including PoE and Type-C.
Provides instructions for mounting the UG56 gateway securely onto a wall.
Steps to connect to the gateway's Wi-Fi and access the web GUI from a computer.
Instructions for connecting to the gateway via an Ethernet cable and accessing the web GUI.
Details on setting up a wired Ethernet connection for the gateway, including IP configuration.
Steps for connecting the UG56 gateway to a Wi-Fi network by scanning and joining.
Instructions for configuring the gateway to use a cellular network connection with SIM card details.
Steps to connect the UG56 gateway to the Milesight IoT Cloud platform for monitoring.
Instructions for connecting the UG56 gateway to external MQTT or HTTP servers for data transfer.
To Next Page
