Need help?Do you have a question about the Milesight SG50 and is the answer not in the manual?
General| Model | SG50 |
|---|---|
| Category | Gateway |
| Protocol | LoRaWAN |
| Number of Channels | 8 |
| Humidity | 0% to 95% (non-condensing) |
| Enclosure | IP30 |
| Frequency Band | EU868, US915, AS923, AU915, KR920, IN865, RU864 |
| Wi-Fi | 802.11 b/g/n |
| Ethernet | 10/100 Mbps |
| Cellular | Optional |
| Power Supply | 12V DC, PoE |
| Operating Temperature | -20°C to +55°C |
| Dimensions | 120 x 120 x 40 mm |
| GPS | Optional |
Introduces the SG50 gateway's purpose and capabilities.
Highlights the SG50 gateway's main functional and design advantages.
Lists all components included in the SG50 gateway package.
Visual and functional overview of the SG50 gateway's external components.
Explains button functions and LED status meanings on the gateway.
Shows the physical dimensions of the SG50 gateway.
Guide for inserting the nano SIM card into the gateway.
Explains connecting external power or using solar panel and battery.
Instructions for mounting the gateway onto a wall or pole.
Guide for attaching and positioning the solar panel for optimal charging.
Steps for attaching the main device to the solar panel bracket.
Instructions for mounting the LoRaWAN antenna using U-strap or U-bolt.
Shows current operational status and system information of the gateway.
General configuration settings for the packet forwarder.
Configuration for LoRa radio channels, frequencies, and bandwidth.
Configures device Wi-Fi AP mode and connection limits.
Setup for cellular network connections via SIM card.
Settings for changing device username and password.
Configures gateway system time, time zone, and NTP settings.
Manages system logs, severity level, and downloads log files.
Procedures for backup, restore, and upgrade of firmware and configuration.
Instructions to reboot the gateway to apply changes or restart.
Lists default LoRaWAN frequencies supported by the gateway for regions.
To Next Page
