Need help?Do you have a question about the Milesight UG63 and is the answer not in the manual?
Identifies the target audience for the user guide.
Lists documents relevant to the UG63 gateway.
States compliance with regulatory standards like CE, FCC, RoHS.
Provides a general overview of the UG63 LoRaWAN® gateway.
Highlights the key benefits and features of the UG63 gateway.
Lists the technical specifications of the UG63 gateway.
Details the physical dimensions of the UG63 gateway.
Overview of the gateway's current operational status.
Shows the status and configuration of the gateway's Ethernet port.
Displays the status of various VPN tunnel types configured on the gateway.
Provides information on the routing table and ARP cache.
Configuration settings for the LoRaWAN packet forwarder.
Configuration of radio channels for LoRaWAN communication.
Tool for analyzing radio frequency noise and interference.
Advanced settings for beacon transmission and validation.
Allows custom configuration of the packet forwarder.
Displays recent traffic received by the gateway.
General settings for the LoRaWAN network server.
Configuration of applications for device data management.
Defines device capabilities and boot parameters for the network server.
Manages LoRaWAN node devices connected to the gateway.
Manages multicast groups for sending downlink messages to multiple devices.
Displays details of data packets sent and received by the gateway.
Configuration of network interfaces like Ethernet and Loopback.
Configuration of the loopback interface for gateway ID management.
Configuration settings for Dynamic Multipoint VPN (DMVPN).
Configuration settings for IPsec tunnels for secure remote access.
Configuration settings for Generic Routing Encapsulation (GRE) tunnels.
Configuration settings for Layer Two Tunneling Protocol (L2TP) VPNs.
Configuration settings for Point-to-Point Tunneling Protocol (PPTP) VPNs.
Configuration settings for OpenVPN client for secure VPN connections.
Import/export certificate and key files for OpenVPN and IPsec.
Configuration of general system parameters.
Configuration of system time, time zone, and synchronization.
Configuration of email settings for sending alerts.
Configuration of email alarms for system events.
Changing the administrator username and password.
Creating and managing common user accounts with specific permissions.
Configuration and management of Simple Network Management Protocol (SNMP).
Configuration of Management Information Base (MIB) views.
Configuration of View-based Access Control Model (VACM) for SNMP.
Configuration for enabling SNMP trap notifications.
Downloading Management Information Base (MIB) files.
Managing the gateway via Milesight DeviceHub.
Viewing logged alarm messages and events.
Configuring event recording and notification settings.
Access to diagnostic tools like Ping and Traceroute.
Tool for troubleshooting network routing issues.
Configuration of scheduled tasks, such as gateway reboot.
System log for monitoring events and troubleshooting.
Configuration for remote log server and local log storage.
Process for upgrading the gateway firmware.
Backup and restore gateway configurations and reset to factory defaults.
Reboots the gateway to apply settings or recover from issues.
Steps to reset the gateway to its original factory settings.
Procedure to restore factory defaults using the hardware reset button.
Instructions for upgrading the gateway's firmware.
Configuration of Ethernet port settings for network connectivity.
Configuring various packet forwarders for LoRaWAN communication.
Steps to connect the gateway to the Milesight IoT Cloud platform.
Creating and configuring applications for device data.
Adding and configuring LoRaWAN node devices.
Sending data and commands to connected devices.
Connecting the UG63 gateway to UG65/UG67 for multi-gateway setup.
To Next Page
General
