EasyManua.ls Logo

Milesight UG63 - 3.2.1.5 Custom; 3.2.1.6 Traffic

Milesight UG63
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Figure 3-2-1-8
Item
Description
Default
Keep Alive
Interval
Enter the interval of keep alive packet which is sent
from gateway to network server to keep the connection
stable and alive.
Range: 1-3600.
10 s
Stat Interval
Enter the interval to update the network server with
gateway statistics. Range: 1-3600.
30 s
Push Timeout
Enter the timeout to wait for the response from server
after the gateway sends data of node. Rang: 1-1999.
100 ms
Forward CRC
Disabled
Enable to send packets received with CRC disabled to
the network server.
Disabled
Forward CRC
Error
Enable to send packets received with CRC errors to the
network server.
Disabled
Forward CRC
Valid
Enable to send packets received with CRC valid to the
network server.
Enabled
Table 3-2-1-8 Advanced Parameters
Figure 3-2-1-9
Item
Description
Default
Enable
Enable to scan occupancy of current channels before
transmission.
Note: AU915 and US915 do not support LBT feature.
Disabled
RSSI Target
Enter the criteria of an idle channel. If actual RSSI of
-80

Other manuals for Milesight UG63

Related product manuals