Need help?Do you have a question about the Milesight UG65 and is the answer not in the manual?
General| Processor | Quad-core ARM Cortex-A53 |
|---|---|
| Storage | 8 GB eMMC |
| Ingress Protection | IP65 |
| Power Supply | 12V DC |
| LoRa Channels | 8 |
| Wi-Fi | 802.11 b/g/n |
| Max RF Output Power | 27 dBm |
| Sensitivity | -137 dBm |
| Weight | 400 g |
| Connectivity | Wi-Fi, Ethernet, Cellular |
| LoRaWAN | Supported |
| Operating Temperature | -40°C to 70°C |
| LoRa Frequency | EU868, US915, AU915, AS923, CN470 |
| Ethernet | 10/100 Mbps |
| Cellular | 4G LTE |
| Power Input | 12V DC |
| LoRaWAN Protocol | V1.0.2, V1.0.3 |
| Ethernet Interface | 1 x RJ45 |
Identifies the intended audience for the guide.
Lists other relevant Milesight documentation.
Provides a general overview of the UG65 gateway.
Details the technical specifications of the UG65 gateway.
Explains how to connect to the UG65 gateway via Wi-Fi.
Details how to connect to the UG65 gateway using an Ethernet cable.
Overview of the gateway's current operational status.
Configuration settings for LoRaWAN functionality.
Configuration of network interfaces and protocols.
General system settings, management, and logging.
Tools and procedures for system maintenance.
Manages applications and Python support on the gateway.
Example for configuring the packet forwarder.
Defines data decoding and transport protocols for applications.
Resets the gateway to its factory default settings.
Instructions for upgrading the gateway's firmware.
Examples for Wi-Fi AP and Client modes.
To Next Page
