Milesight UG65 - Specifications

UG65 User Guide
www.milesight-iot.com 8
Easy Maintenance
- Milesight DeviceHub provides easy setup, mass configuration, and centralized
management of remote devices
- The user-friendly web interface design and various upgrading options help
administrator to manage the device as easy as pie
- WEB GUI and CLI enable the admin to achieve quick configuration and simple
management among a large quantity of devices
- Users can efficiently manage the remote devices on the existing platform through the
industrial standard SNMP
Capabilities
- Link remote devices in an environment where communication technologies are
constantly changing
- Industrial quad core 64-bit ARM Cortex-A53 processor, high-performance operating up
to 1.5GHz with low power consumption, and 8GB eMMC available to support more
applications
- Support wide operating temperature ranging from -40°C to 70°C/-40°F to 158°F
1.3 Specification
Hardware System
CPU Quad-core 1.5GHz, 64-bit ARM Cortex-A53
Memory 8 GB eMMC Flash, 512 MB DDR4 RAM
LoRaWAN
Antenna
Fully Integrated and Internal Antenna
(Optional: 1 × 50 Ω N-Female External Connector)
Channel 8
Frequency Band
Sensitivity -140dBm Sensitivity @292bps
Output Power
Protocol V1.0 Class A/Class C and V1.0.2 Class A/Class C
Ethernet
Ports 1 × RJ-45 (PoE PD supported)
Physical Layer 10/100/1000 Base-T (IEEE 802.3)
Data Rate 10/100/1000 Mbps (auto-sensing)
125kHz:867.1-867.9MHz,868.1-868.5MHz(for CE)
12.86dBm(for CE)
LoRa:923.3-927.5MHz(for FCC)
11.47dBm(for FCC)
(Note: In the FCC market,CE parameters are masked by software.)