Milesight UG65 - Packet Forwarder; General

UG65 User Guide
www.milesight-iot.com 23
3.2.1 Packet Forwarder
3.2.1.1 General
Figure 3-2-1-1
General Settings
Item Description Default
Gateway EUI Show the identifier of the gateway.
Generated from MAC
address of the
gateway and cannot
be changed.
Gateway ID
Fill in the corresponding ID which you’ve used
for register gateway on the remote network
server, such as TTN. It is usually the same as
gateway EUI and can be changed.
The same as
gateway EUI.
Frequency-Sync
Sync frequency configurations from network
server by selecting the corresponding ID.
Disabled
Multi-Destination
The gateway will forward the data to the
network server address that was created and
enabled in the list.
Local host
Table 3-2-1-1 General Setting Parameters
Related Configuration Example
Packet fowarder configuration