Milesight UG65 - Certifications

UG65 User Guide
www.milesight-iot.com
74
Remote Virtual IP
The remote tunnel address of OpenVPN's tunnel.
Client Subnet
Local subnet IP address of OpenVPN client.
Client Netmask
Local netmask of OpenVPN client.
Renegotiation Interval(s)
Set interval for renegotiation. Range: 0-86400.
Max Clients
Maximum OpenVPN client number. Range: 1-128.
Enable CRL
Enable CRL
Enable Client to Client
Allow access between different OpenVPN clients.
Enable Dup Client
Allow multiple users to use the same certification.
Enable NAT
Check to enable the NAT traversal function.
Compression
Select "LZO" to compress data.
Link Detection Interval
Set link detection interval time to ensure tunnel connection.
Range: 10-1800.
Cipher
Select from "NONE", "BF-CBC", "DES-CBC", "DES-EDE3-CBC",
"AES-128-CBC", "AES-192-CBC" and "AES-256-CBC".
MTU
Enter the maximum transmission unit. Range: 64-1500.
Max Frame Size
Set the maximum frame size. Range: 64-1500.
Verbose Level
Select from "ERROR", "WARING", "NOTICE" and "DEBUG".
Expert Options
User can enter some other PPP initialization strings in this
field and separate the strings with blank space.
Local Route
Subnet
The real local IP address of OpenVPN client.
Netmask
The real local netmask of OpenVPN client.
Account
Username & Password
Set username and password for OpenVPN client.
Table 3-3-6-10 OpenVPN Server Parameters
3.3.6.8 Certifications
User can import/export certificate and key files for OpenVPN and IPsec on this page.
Figure 3-3-6-13
OpenVPN Client
Item
Description
CA
Import/Export CA certificate file.