Milesight UG65 - Page 73

UG65 User Guide
www.milesight-iot.com
73
Figure 3-3-6-11
Figure 3-3-6-12
OpenVPN Server
Item
Description
Enable
Enable/disable OpenVPN server.
Protocol
Select from TCP and UDP.
Port
Fill in listening port number. Range: 1-65535.
Listening IP
Enter WAN IP address or LAN IP address. Leaving it blank
refers to all active WAN IP and LAN IP address.
Interface
Select from " tun" and "tap".
Authentication
Select from "None", "Pre-shared", "Username/Password",
"X.509 cert" and "X. 509 cert +user".
Local Virtual IP
The local tunnel address of OpenVPN's tunnel.