Milesight UG63 - 3.5 Maintenance; 3.5.1 Tools

65
Event Settings
Item
Description
Enable
Check to enable "Events Settings".
WAN Up
Ethernet cable is connected to WAN port.
WAN Down
Ethernet cable is disconnected to WAN port.
VPN Up
VPN is connected.
VPN Down
VPN is disconnected.
Power On
The gateway has powered on.
Record
The relevant content of event alarm will be recorded on "Event"
page if this option is checked.
Email
The relevant content of event alarm will be sent out via email if
this option is checked.
Email Setting
Click and you will be redirected to the page "Email" to configure
the Email group.
Table 3-4-5-2 Events Parameters
Related Topics
Email Setting
3.5 Maintenance
This section describes system maintenance tools and management.
3.5.1 Tools
Troubleshooting tools includes ping and traceroute.
3.5.1.1 Ping
Ping tool is engineered to ping outer network.
Figure 3-5-1-1
PING
Item
Description
Host
Ping outer network from the gateway.
Table 3-5-1-1 IP Ping Parameters
3.5.1.2 Traceroute
Traceroute tool is used for troubleshooting network routing failures.