4. Log in the Milesight IoT Cloud. Then go to “My Devices” page and click “+New Devices”
to add gateway to Milesight IoT Cloud via SN. Gateway will be added under “Gateways”
menu.
5. The gateway is online on Milesight IoT Cloud. For UG63, it’s suggested to bind not more
than 20 devices.
4.6 Application Configuration
You can create a new application on this page, which is mainly used to define the method
of decoding the data sent from end-device and choosing the data transport protocol to
send data to another server address. The data will be sent to your custom server address
using MQTT, HTTP or HTTPS protocol.
1. Go to “Network Server → Application”.
To Next Page
Loading...
