EasyManua.ls Logo

Milesight UG63 - 3.3.2.3 GRE

Milesight UG63
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
DPD Interval Time(s)
Set DPD interval time to detect if the remote side fails.
DPD Timeout(s)
Set DPD timeout. Range: 10-3600.
IPsec Advanced
Enable Compression
The head of IP packet will be compressed after it's enabled.
VPN Over IPsec Type
Select from "NONE", "GRE" and "L2TP" to enable VPN over
IPsec function.
Table 3-3-2-3 IPsec Parameters
3.3.2.3 GRE
Generic Routing Encapsulation (GRE) is a protocol that encapsulates packets in order to
route other protocols over IP networks. It’s a tunneling technology that provides a channel
through which encapsulated data message can be transmitted and encapsulation and
decapsulation can be realized at both ends.
In the following circumstances the GRE tunnel transmission can be applied:
- GRE tunnel can transmit multicast data packets as if it were a true network interface.
Single use of IPSec cannot achieve the encryption of multicast.
- A certain protocol adopted cannot be routed.
- A network of different IP addresses shall be required to connect other two similar
networks.
Figure 3-3-2-5
GRE
Item
Description
Enable
Check to enable GRE function.

Other manuals for Milesight UG63

Related product manuals