Milesight SG50 - Reboot Gateway; Appendix; Default Frequency Bands

29
Firmware
upgrade firmware.
5.5.3 Reboot
On this page you can reboot the gateway and return to the login page. We strongly recommend
clicking “Save” button before rebooting the gateway so as to avoid losing the new configuration.
Appendix
Default Frequency
Supported Freq
Channel/MHz
CN470
471.9, 472.1, 472.3, 472.5, 472.7,472.9, 473.1, 473.3 (8~15)
EU868
868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9
IN865
865.0625, 865.4025, 865.6025, 865.985, 866.185, 866.385, 866.585, 866.785
RU864
868.9, 869.1, 869.3, 867.3, 867.5, 867.7, 867.9, 868.1
AU915
916.8, 917, 917.2, 917.4, 917.6, 917.8, 918, 918.2 (8~15)
US915
903.9, 904.1, 904.3, 904.5, 904.7, 904.9,905.1, 905.3 (8~15)
KR920
922.1, 922.3, 922.5, 922.7, 922.9, 923.1, 923.3, 923.5
AS923-1
923.2, 923.4, 922, 922.2, 922.4 ,922.6, 922.8 ,923
AS923-2
921.2, 921.4, 921.6, 921.8, 922, 922.2, 922.4, 922.6
AS923-3
916.6, 916.8, 917, 917.3, 917.4, 917.6, 917.8, 918
AS923-4
917.3, 917.5, 917.7, 917.9, 918.1, 918.3, 918.5, 918.7
-END-