Milesight SG50 - Packet Filters

21
Data Rate/Bit
Set the data rate.
5.2.3 Packet Filters
SG50 supports to filter uplink packets via different conditions to reduce network congestion,
save network traffic and ensure the safety operations.
Packet Filters
Parameters
Description
Filters by NetID
Forward/Not forward the uplink packets that meet the NetID.
Filters by JoinEUI
Forward/Not forward the join request packets that meet the JoinEUI range.
Filters by DevEUI
Forward/Not forward the join request packets that meet the DevEUI range.
Mode
Select the filter mode as black list or white list.
White List: Only forward the packets in this list to the network server.
Black List: Only forward the packets except this list to the network server.
List
Set the specific filtering value or range list. Every condition supports to add 5
lists at most.
Note: When join EUI and dev EUI are both configured, only packets that meets both conditions
will be forwarded.