Milestone Husky - Administrator Manual
Central properties
Enable Milestone XProtect
Central connections
Enables the use of Central connections, allowing you to specify
further properties.
Type the name used for the connection between the your system
and Central servers or the Milestone Integration Platform. The
name must match the name specified on the Central server or in
the Milestone Integration Platform.
Type the password used for the connection between system and
Central servers or the Milestone Integration Platform. The
password must match the password specified on the Central
server or in the Milestone Integration Platform.
Type the port number to which the XProtect Central server or the
Milestone Integration Platform should connect when accessing the
surveillance system server. The port number must match the port
number specified on the XProtect Central server or in the
Milestone Integration Platform. The default port is 1237.
Access control
About access control integration
The use of XProtect Access requires that you have purchased a base license that allows you to
access this feature within your XProtect VMS system. You also need an access control door license
for each door you want to control.
You can use XProtect Access with access control systems from vendors where a vendor-specific
plug-in for XProtect Access exists.
The access control integration feature introduces new functionality that makes it simple to
integrate customers’ access control systems with XProtect. You get:
A common operator user interface for multiple access control systems in XProtect Smart
Client.
Faster and more powerful integration of access control systems.
More functionality for the operator (see below).
In XProtect Smart Client, the operator gets:
Live monitoring of events at access points.
Operator aided passage for access requests.
Map integration.
To Next Page
Loading...