Milestone Husky - Administrator Manual
Enable dedicated live
stream
This additional stream feature lets you use the alternative stream
of the camera. It enables two independent streams to the
recording server—a stream for live viewing and another stream
for recording purposes, with different resolution, encoding, and
frame rate.
Select the type of the live stream. Stream settings for viewing
live video and for recording video may very well be different in
order to get the best result.
Select the resolution of the camera.
Select the camera's live frame rate per second (FPS)
Manual recording
When you configure video and recording (see "About video and recording configuration" on page
60), you can specify certain properties for many cameras in one go. In the case of manual
recording, it is because the properties are shared by all cameras.
When manual recording is enabled, XProtect Smart Client users with the necessary rights can
manually start recording if they see something of interest while viewing live video from a camera
which is not already recording.
If enabled, manual recording can take place even if recording for individual cameras (see
"Recording" on page 90) is set to Never or Conditionally.
When started from XProtect Smart Client, such user-driven recording always takes place for a fixed
time, for example for five minutes.
Select check box to enable manual recording and specify further
details.
Default duration of manual
recording
Period of time (in seconds) during which user-driven recording
take place. Default duration is 300 seconds, corresponding to five
minutes.
Maximum duration of
manual recording
The maximum allowed period of time for user-driven recording.
This maximum is not relevant in connection with manual
recording started from XProtect Smart Client, since such manual
recording always takes place for a fixed time.
In some installations, you can also combine manual recording
with third-party applications if integrating these with the system
through an API or similar, and in such cases specifying a
maximum duration may be relevant.
If you are using manual recording in connection with XProtect
Smart Client only, disregard this property.
To Next Page
Loading...