Milestone Husky - Administrator Manual
Letter representing the drive in question, for example C:.
Path to where you save the files, for example C:\ or
\\OurServer\OurFolder\OurSubfolder\.
What the storage area is used for, for example recording or
archiving.
Amount of video data on the drive.
Amount of other data on the drive.
Amount of unused space left on the drive.
Camera properties
General
When you configure video and recording (see "About video and recording configuration" on page
60) for specific cameras, properties include:
Cameras are by default enabled, meaning that provided they are
scheduled to be online (see "Online period" on page 134) and
that they can to transfer video to your system. You can disable
an individual camera, in which case no video/audio is transferred
from the camera source to your system.
Select this check box to show a preview of your camera's video.
If you clear the check box, your system does not show a preview
for your camera.
The name as it appears in the Management Application as well as
in clients. You can overwrite the existing name with a new one.
Names must be unique, and must not contain any of these special
characters: < > & ' " \ / : * ? | [ ]
Users of XProtect Smart Client can take advantage of keyboard
shortcuts, some of which let the users toggle between viewing
different cameras. Such shortcuts include numbers which are
used to identify each camera.
Shortcut numbers must be unique for each camera. A camera
shortcut number must not contain any letters or special
characters, and must not be longer than eight digits. Examples of
correct camera shortcut numbers: 3, 12345678. Examples of
incorrect camera shortcut numbers: Cam#3, 123456789.
More information about using the keyboard shortcuts is available
in the separate documentation for XProtect Smart Client.
To Next Page
Loading...