EasyManua.ls Logo

Milestone Systems Husky M30 - Page 99

Milestone Systems Husky M30
273 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Milestone Husky - Administrator Manual
Advanced configuration
99
Enable
Enable the Privacy Masking feature.
Show grid
Turn the grid on or off. Turning the grid off may provide a less
obscured view of the preview image. Select areas to exclude the
same way as you would when the grid is visible.
When on, the preview image is divided into small sections by a
grid. To define areas which should be excluded from privacy
masking, drag the mouse over the areas in the preview image
while pressing the mouse button down. The left mouse button
selects a grid section and the right mouse button clears a grid
section. Selected areas are highlighted in red.
Show privacy mask
Turn the red area indicating privacy masking on or off. Turning
off the red area may provide a less obscured view of the preview
image.
Clear
Clear the privacy masking.
Fisheye lens (properties)
Fisheye lens technology allows you to view panoramic video through an advanced fisheye lens.
To use fisheye lens technology, you must enable the technology and, in some cases, enter a
special license key. If you are unsure if you need a special fisheye license key, contact your system
vendor for further information.
Name
Description
Enable fisheye lens support
Select the check box to enable use of the fisheye lens technology
and to be able to specify further properties.
Immervision Enables
®
panomorph RPL number
When you enable the panomorph support functionality, you must
also select a Registered Panomorph Lens (RPL) number from the
ImmerVision Enables
®
panomorph RPL number list to ensure
that the lens is correctly identified and configured with the lens
used with the camera. You can usually find the RPL number on
the lens itself or on the box it came in.
If you want to add additional types of lenses, go to File
and select Import new lens types. Locate the .xml file that
contains information about the lens type and press OK.
For details of ImmerVison, panomorph lenses, and RPLs, see the
ImmerVision Enables website
https://www.immervisionenables.com/.
Camera position/orientation
Choose whether the camera is mounted in the ceiling, on a wall
or on ground level.
PTZ preset positions
PTZ-related properties are only available when you are dealing with a pan-tilt-zoom (PTZ) camera.

Table of Contents